Selecting The Dimmer Mode - JVC KD-LH1150 Manual De Instrucciones

Selecting the dimmer mode

You can dim the display at night automatically or
as you set the timer.
When shipped from the factory, Auto Dimmer
mode is activated.
Note:
Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, select any other than "Auto."
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See pages 24 and 25.)
2
Press number button 3 to select
"DISP"—Display category of the
PSM settings.
3
Press ¢
"Dimmer" if not shown on the
display.
28
The next-step-operation
buttons start flashing.
or 4
to select
4
Set the dimmer mode as you like.
• Auto: Activates Auto Dimmer.
When you turn on the car
head lights, the display
automatically dims.
• Off: Cancels Auto Dimmer.
• On: Always dims the display.
• Time Set: Used to set the timer for the
dimmer function.
Note:
Selecting "Auto" or "Time Set" may change the
display pattern to the "Negative" or "Positive"
pattern if "LCD type" is set to "Auto."
• If you select "Timer Set," go to the following
steps to set the timer.
• If you select any other than "Timer Set," go
to step 7 to finish the setting.
5
Select "From– To" to set the timer for
the dimmer mode.
6
Set the timer.
1 Turn the control dial to select the start
time.
2 Press ¢
3 Turn the control dial to select the end
time.
7
Finish the setting.
once.