Changing The Display Color - JVC KD-LH1150 Manual De Instrucciones

Changing the display color

You can set the display color using the PSM
control. You can select your favorite color for
each source (or for all sources).
You can also create your own colors, and set
them as the display color.
When shipped from the factory, "All SRC" (all
source) is selected.
Setting the desired color for each
source
Once you have set the color for each source (or
for all sources), the display illuminates in the
selected color when the source is selected.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See pages 24 and 25.)
The next-step-operation
buttons start flashing.
2
Press number button 6 to select
"COLOR"—Color category of the
PSM settings.
The "All SRC" setting screen appears on the
display.
3
Select the source—All SRC, CD,
Changer (Line), FM, or AM—that you
want to set the display color for.
*1
All SRC
AM
FM
1
* When you select "All SRC," you can use the
same color for all the sources.
* 2 Selected only either component set in the
"Ext Input" setting.
4
Select the display color.
O Aqua O Sky O Sea O
Every
1
*
Leaves O Grass O Red O Rose O
Amber O Honey O Violet O Cotton O
Snow O User O (back to the
* 2
beginning)
1
* When you select "Every," the color changes
every 2 seconds (changing to every color
listed above except "User").
2
* When you select "User," the user-edited
colors—"Day" and "Night" will be applied.
(See page 30.)
5
Repeat steps 3 and 4 to select the
color for each source (except when
selecting "All SRC" in step 3 ).
6
Finish the setting.
CD
Changer *2
(Line)
As you turn the control
dial, the colors change
as follows:
29