Preparatory Works - Baby auto G-CAT 123 Manual De Uso

3. PREPARATORY WORKS

3.1 Prepare ISOFIX
1. If your vehicle is not equipped with the ISOFIX insert guides as standard,
clip the two insert guides
cut-out facing upwards onto the two ISOFIX attachment points of your
vehicle.
TIP: The ISOFIX attachment points are located between the surface and
the backrest of the vehicle seat (fig.1).
2. Pull the fabric loop
(fig.2).
3.2 Adjusting the headrest in 5-point harness installation. Group 1
A correctly adjusted headrest
child in the safety seat:
The headrest
(A)
the same level as your child's shoulders (fig.3).
CAUTION! The shoulder belts
child or at ear height or above the ears.
The shoulder belts are adjusted as follows:
1. Press the adjusting button
shoulder belts
(D)
loosen the 5-point harness of the child seat as mush as possible (fig.4).
Back side of the child seat:
2. Press the button of the shoulder belt height adjuster
of the seat shell and tilt the shoulder belt height adjuster
you.
3. Slide the shoulder belt height adjuster
of the shoulder belts
your child by releasing the button (fig.5).
3.3. Adjusting the headrest in vehicle belt installation. Group 2/3
A correctly adjusted headrest
belt section is optimally positioned, and gives your child the optimal
protection.
The headrest
(A)
26
which are included with the seat with the
(P)
to pull out both locking arms to longest position
(Q)
(A)
must be adjusted so that the shoulder belts
(D)
and at the same time pull both
(F)
forwards. Do not pull on the shoulder pads
and engage it in the position that fits for
(D)
must be adjusted so that there is a space two fingers
ensures optimal protection for your
must not run behind the back of the
to select the correct height
(J)
ensures that the diagonal seat
(A)
are at
(D)
,
(C)
at the rear
(J)
towards
(J)