Connecting The Electrical Power To Magicsafe - Waeco MagicSafe MS670 Instrucciones De Montaje Y De Uso

_MS-670.book Seite 41 Donnerstag, 8. Mai 2008 4:55 16
MagicSafe MS670
7 Connecting the electrical power to
MagicSafe
a
Caution!
For vehicles with catalysers, you must shut down the fuel pump
while making the electrical connections.
The complete circuit diagram for the alarm system can be found in fig. 8,
page 6.
No. in
fig. 8, page 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
All plugs are coded so that you cannot connect them incorrectly.

Connecting the electrical power to MagicSafe

Description
20-pin plug of the connection cable
Convenience output
Bonnet contact switch
Alarm siren
Start block
Indicator
Red plug connection for key holder
White plug connection for key holder
Key holder incl. status LED
3-pin plug for connection to the ultrasonic module
Red plug connection for ultrasonic sensor – ultrasonic
module
White plug connection for ultrasonic sensor – ultrasonic
module
Ultrasonic module
Ultrasonic sensors
Connected positive terminal (ignition, terminal 15)
Battery
41