Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-1900-002.book Page 23 Friday, March 28, 2014 3:24 PM
– Select a permanently unchangeable measuring section with a length of
approx. 3 to 10 metres; its length must be precisely known (e.g. the
width of a room or a door opening). The measurement should be car-
ried out under favourable conditions, meaning, the measuring dis-
tance must be indoors and the target surface for the measurement
must be smooth and reflect well.
– Measure the distance 10 times after another.
Under favourable conditions, the deviation of the individual measure-
ments from the mean value must not exceed ±3,5 mm (max.) over the
complete measuring distance. Log the measurements, so that you can
compare their accuracy at a later point of time.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning
agents or solvents.
Maintain the reception lens 8 in particular, with the same care as required
for eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken in manufacturing
and testing procedures, repair should be carried out by an authorised af-
ter-sales service centre for Bosch power tools. Do not open the measuring
tool yourself.
For repairs, send in the measuring tool in.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning
our products and their accessories.
In all correspondence and spare parts orders, please always include the
10-digit article number given on the type plate of the measuring tool.
Bosch Power Tools
English | 23
1 609 92A 0JX | (28.3.14)
Publicidad
Tabla de contenido
