T'nB SPCAMHD2 Manual De Instrucciones página 36

EN
Notice to users:
The device delivers exceptional images and videos. Therefore, only the micro SD
cards of minimum class 10 are accepted by the device
Prevention of damage due to the water in your camera
The rubber seal that covers the inside of the housing forms a waterproof barrier
that protects your sport camera in wet conditions and under the water. Make
sure that the rubber seal remains clean. A single hair or a grain of sand can
cause a leak. After each use in the salt water, you must rinse the outside of the
housing with some fresh water and dry it. Otherwise, the pivot may rust and the
salt accumulates in the seal, which can cause some failures. To clean the seal,
rinse it in the fresh water and shake it dry (wiping with a cloth may leave fluff
and compromise the seal). Reinstall the seal into the slot of the back door of the
housing.
CAUTION: If you do not follow these precautions whenever you use your sport
camera, the leaks can damage or destroy your camera. The warranty does not
cover the damage caused by user error.
36
_Notice_SPCAMHD2.indd 36 06/05/2015 12:18