Installation; Fitting The Post Mounting Bracket - SOMFY IXENGO L Manual De Instalación

INstALLAtION

The figure below illustrates the dimensions to be defined for installation.
P
A
Key:
A-B: dimensions used to determine where to fit the post mounting bracket P
c: distance between mounts (recommended value: 805 mm)
X: distance from the gate centreline to the post edge
Z: distance between the post edge and the motor rotation centreline
α°: gate opening angle
P: post mounting bracket
D: gate section length
F: gate section mounting bracket.

Fitting the post mounting bracket

• Define the desired opening angle "α°".
• Measure the X dimension on the gate.
• Calculate B = Z + X given that Z = 110 mm
• From the table, choose A and B dimensions that are close to identical
so as to match the opening speed and ensure proper motor drive operation.
If the chosen dimensions are too far apart, gate section motion will not be
constant and the push or pull torque applied will vary during motion.
The table shows the optimum values for A and B for the various "α°" opening angles.
A 100
B 110
130 103 106
140 102 105
150 101 104
160 100 103
170 100 102 105
180 99 102 104
190 98 101 104
200 98 101 103
210 97 100 103
220 97 100 102
230 96 99 101
240 96 99 101
250 95 98 100
260 95 98 100
Values of "A" and "B" can be chosen from the table based on the desired degree of opening "
Copyright © 2008 Somfy SAS. All rights reserved.
X
B
Z
C
120 130 140 150
110 112 116 118
109 111 113 117
108 110 112 116
106 109 112 114
108 111 113
107 110 112
107 109 111
106 108 110
105 107 109
104 106 108
104 105 97
103 101 91
102 91
92
D
F
160 170 180 190
121 123 126 124
120 122 124 119
118 120 123 112
117 119 121 106
116 118 109 102
114 117 103 98
113 107 99 95
112 100 95 91
103 95 91
95 91
°
Z = 110
X
B
A
200 210 220 230
113 107 103 99
109 103 99 97
105 100 96 94
101 97 94 92
98 94 91
94 91
91
α°
α°
".
5