Rockford Fosgate RAV Serie Instalación Y Operación página 15

SELECTING X-OVER (Crossover)
NOTE: When using the remote to make adjustments to
X-OVER, the cover must be closed when using the
or buttons.
Press the X-OVER button repeatedly to cycle through LPF
(Low Pass Filter), HPF (High Pass Filter) and SUBSNC
(Subsonic Filter).
When in either LPF or HPF use the UP or DN {Down} button
( or ) to select the frequency to be set. This is
adjustable between OFF, 50Hz, 75Hz, or 100Hz.
When in SUBSNC use the UP or DN {Down} button (
the subsonic filter on or off.
The selection is automatically saved when set.
CHECKING SPEAKER POSITIONS (SPK/POS)
NOTE: When using the remote, the cover must be closed when using
the or
While listening to the unit playing, press and hold the X-OVER button to enter into the speaker
position menu. This allows you to select the optimal sound stage for a specific seating position.
Use the UP or DN {Down} buttons (
Right) and REAR speakers.
All
SURROUND
Press the SURR button to turn Dolby pro logic on. The display
will show PRO LOGIC when on. Press again to turn Dolby pro
logic off.
PANEL DISPLAY
NOTE: The default display for the Tuner or AUX modes is the
title if it has been programmed in. The default can be change by following Panel Display
Default bellow. The default cannot be changed for CD Mode.
Tuner Mode:
The panel will display the band, FM1, FM2 or AM1, and the station frequency or the title for the
frequency will be displayed if a title has been been programmed in.
CD Mode
By Pressing the "DISP" button you can select the display to show the track number and the time
played, or the title for the disc if a disc title has been programmed in.
AUX Mode
The panel will display the mode AUX, or the title for the mode will be displayed if a title has been
programmed in.
PANEL DISPLAY DEFAULT
To set the default, press and hold the DISP button until the hours on the clock begin blinking.
Immediately pressing MODE button allows selection of the default Display by toggling between the
mode name or title. See PROGRAMMING TITLES for information.
NOTE: A maximum total of 100 titles can be programmed into the unit.
buttons.
or
Front Left
or ) to turn
) to select between ALL, F.L (front Left), F.R (Front
Front Right
O – B
PERATION
Remote
Cover Open
Remote
Cover Closed
Rear
Remote
Cover Open
ASIC
15