Names And Functions Of Parts - Denon DCD-485 Instrucciones De Operación

ENGLISH

NAMES AND FUNCTIONS OF PARTS

q
Power Switch (POWER)
• When the power is turned on, "
No. display and if no disc is loaded, "
on the digital display.
• If the power is turned on with a disc already loaded, the total
number of tracks on the disc is displayed on the TRACK No.
display, the total time is displayed on the TIME display, the
numbers on the music calendar light up to the number of
tracks on the disc and playback begins.
w
Headphones Jack (PHONES)
• For private listening, you can connect your headphones to
this jack. (Headphones are sold separately.) Do not raise the
volume level too much when listening through headphones.
e
Volume Control (PHONES LEVEL) (DCD-685 only)
• Use this to adjust the output level of the headphones.
r
Remote Control Sensor (REMOTE SENSOR)
• This sensor receives the infrared light transmitted from the
wireless remote control unit.
• For remote control, point the supplied remote control unit
RC-266 towards this sensor.
t
Display
• The digital display is divided into sections, such as displays
for track number, playback time and calendar, as shown
below.
Auto space
indicator
Remaining time
of entire disc
°°
A.SPACE
Play indicator
y
Pitch – Button (PITCH –) (DCD-685 only)
• Push this button to slow down the playing speed.
(Refer to page 12.)
u
Pitch + Button (PITCH +) (DCD-685 only)
• Push this button to make the playing speed faster.
(Refer to page 12.)
i
Auto Edit Button (A. EDIT)
• The tracks on a CD are automatically split into two halves,
Side A and Side B, like an analog disc, with the division at the
place between tracks which is closest to 1/2 the total playing
time and with the tracks remaining in the same order.
(Refer to page 11.)
6
‚‚
" appears on the TRACK
‚‚ ‚‚ ‚‚
M
20-track
music calendar
Remaining time
of current track
° ° ° ° 1 2 3 4 5
6 7 8 9 10
M S
11 12 13 14 15
TOTAL SINGLE
16 17 18 19 20
PLAY PAUSE REPEAT A-B PROG
Pause
indicator
All repeat indicator
A-B repeat indicator
Program indicator
Pitch control indicator
o
Repeat All Button (ALL)
• Push this button to repeat playback of all tracks.
" appears When this button is pushed,
S
and all tracks on the disc or in a program will be repeatedly
played back.
• Push this button once more to disengage the repeat function.
(Refer to page 10.)
!0
A-B Repeat Button (A-B)
• Push this button for repeat playback between a designated
starting point (A) and at ending point (B). (Refer to page 10.)
!1
Auto Space Button (A. SPACE)
• Pushing this button will cause the
light and a blank space of approximately 4 seconds is
inserted between tracks during CD playback. Pushing the
button once more, the
Auto Space feature is cancelled.
• When one of the automatic search buttons (
jog dial is pushed, the Auto Space function will not operate.
• The Auto Space function will work during normal playback as
well as programmed playback or random playback.
• Although 4-second blanks are inserted between tracks, this
additional time is not reflected by the indication on the time
remaining display or time display when the Auto Edit function
is engaged. (Refer to page 11.)
!2
Jog Dial (
• Turn this to move to the beginning of the desired track.
(Refer to page 9.)
!3
Time Mode Button (TIME)
• This button is used to select the desired indication on the
TIME display. The indication on this display will change each
time the button is pushed.
Normally, the elapsed playback time of the current track is
displayed. Pushing the button once,
and the remaining time of the current track is displayed.
Pushing once more,
time of remaining tracks is displayed. However, when
programmed play is in progress, the total remaining time of
the program is displayed. Push the button once again to
return to the normal display of the elapsed playback time of
the current track.
• For discs containing more than 20 tracks, the remaining time
is not displayed for tracks 21 and on.
!4
Manual Search Forward Button (
• Push this button during playback for fast forward search. As
long as the button is kept pushed, music signals are played
back faster than normal.
• Pushing this button when the pause mode is engaged, you
can quickly forward the pickup to a desired position, three
times faster compared to manual forward search during
playback. During this time, no sound is heard.
(Refer to page 10.)
!5
Manual Search Reverse Button (
• Push this button during playback for fast reverse search. As
long as the button is kept pushed, music signals are played
back faster than normal.
• Pushing this button when the pause mode is engaged, you
can quickly reverse the pickup to a desired position, three
times faster compared to manual reverse search during
playback. During this time, no sound is heard.
(Refer to page 10.)
REPEAT lights on the display
A. SPACE
indicator goes out and the
A. SPACE
8 9
– )
SINGLE
is displayed and total playing
TOTAL
7
6
indicator to
8 9
or ) or
is displayed
)
)