senya SYBF-K001 Manual De Instrucciones página 31

standby mode after 5 seconds, and the LED screen(5) automatically turns off ,Only the blue
light of the On / Off button(9) is on.
6. Press the On / Off button(9) to activate the LED screen(5) and display the current water
temperature.
7.1 Automatic boiling mode:
When the LED screen(5) is activated, press the On / Off button(9), the blue light will turn red
light, and the kettle will automatically heat up to 100°C boiling.
7.2 Select temperature mode:
When the LED screen(9) is activated, press the Temperature increase(7) or temperature
decrease(8) button to select the required temperature, then press the On / Off button(9), the
blue light will turn red light, and the kettle will automatically heat to the required temperature.
Note:You can choose your heating temperature between 40 ℃ to 100 ℃ ,Every a gradual is 5 ℃ .
8. During the heating process, the LED screen(5) will show the current water temperature, and
the program ends after the required temperature. The red light of the On / Off button turns
blue and the kettle enters standby mode.
III.2.2 Keep hot function
1. Press the On / Off button(9) to activate the LED screen(5). Press the Temperature increase(7)
or temperature decrease(8) button to select the required temperature.
2. Press the On / Off button(9) again, the blue light will turn red, press the Keep hot button(6)
during the red light of the On / Off button(9), the Keep hot button(6) light will turn blue
flashing, and the kettle turns on the heat preservation mode function.
3. Once the selected temperature has been reached, the appliance can maintain the same
temperature for 60 minutes by automatically reheating the water on a regular basis.
Note:During the holding mode, you can select a different holding temperature again.
4. The appliance is automatically switched off after 60 minutes.
Note:
 The keep hot function is not compatible with a temperature of 100°C.
 At any time, you can press the On / Off button(9) once to cancel the current mode.
IV- CARE AND STORAGE
Cleaning
 Cool the kettle before cleaning
 Always remove the plug from the supply before cleaning the kettle.
 The exterior of the kettle can be cleaned with a slightly damp cloth without additives.
 The filter can be removed for cleaning. But it is not dishwasher safe.
30