BASIC INFORMATION ON MENU CONTROL
For all settings:
- The main menu contains four items - Meters/Yards display
(
), Ballistic curve (
USEU
baLL
listic output format (
AbC
can be found in the relevant sections.
- Both the main menu and the setting options are set up as
a continuous loop - i.e. all items/settings will be displayed
over and over as you continue pressing the button.
SETTING THE UNIT OF MEASURE
The Leica Rangemaster 2000-B can be set to a metric (
or imperial (
) unit system, i.e. for distance/temperature/
US
atmospheric pressure either meters/Celsius/millibar or
yards/Fahrenheit/InHg (Inches of Mercury). This setting also
determines the unit for the holdover, the ballistic curves and
the zeroing range (see p. 37/36/35).
), Zeroing range (
) and Bal-
SId
). Details of the individual functions
Setting
1. Press and hold the secondary button (1) (≥3s).
• The display shows
2. Press the main button (2) to select the desired unit of
measure.
= for display in yards
US
= for display in meters
EU
Note:
The current setting can always be seen in the display - if met-
ric values are selected, a dot appears to the bottom right of
the reticule.
)
EU
3. Save your setting by briefly pressing the secondary button.
• The saved setting is initially lit continuously as confirma-
tion, then the display switches to the next item in the
menu (ballistic curve „bALL") and then disappears if no
further settings have been made.
29
(flashing)
USEU