klover DEA ECO8 Instalación Uso Y Mantenimiento página 73

Dear Customer,
first of all, we would like to thank you for choosing a "KLOVER" stove and hope you
will be fully satisfied with your purchase.
Carefully read the warranty certificate on the last page of this User Guide; we advise you to contact the
authorised Technical Assistance Centre (TAC) for the initial start-up and calibration of your stove.
In thanking you once again for trusting KLOVER products, we also wish to inform you that these models are
the result our forty years experience in the construction of solid-fuel products for domestic heating.
Every single detail of the stove is manufactured by qualified staff, using the most advanced equipment.
The manual contains a detailed description of the stove and its operation, alongside instructions for proper
installation, basic maintenance and control points, which must be performed regularly; furthermore, it
contains practical advice for obtaining maximum performance from the stove with minimum fuel
consumption.
The stove's heat output may vary depending on the type of pellets used.
Enjoy heating up with KLOVER!
Technical Support
Klover pellet stoves are imported and distributed by FirePower Heating, Capton, Dartmouth, Devon, TQ6
0JE.
UK technical and product support is provided by FirePower Heating who can be reached on 0844 3320156.
Copyright
All rights reserved. The reproduction of any part of this manual in any form, without the explicit written
permission of KLOVER srl, is forbidden. The content of this manual can be modified without notice. Although
the documentation contained in this manual has been carefully collected and verified, KLOVER srl cannot be
held liable for its resulting use.
Copyright © 2014 KLOVER srl
Latest revision: November 2018
Rev.2.0
2