Jøtul F 262 Instrucciones Para Instalación página 7

Fig. 7
Unscrew the screws (Fig. 7 C) and remove the cover (Fig. 7 B)
1.
from the rear outlet from the inside of the burn chamber.
Fig 8
A
Knock out the removable covers (Fig. 8 A).
1.
Attach the smoke outlet (Fig. 7 A) on the inside of the burn
2.
chamber where the cover was.
Install the cover (Fig. 7 B) where the smoke outlet was.
3.
Refit the exhaust deflectors (Fig. 5 B) and the baffle plate
4.
(Fig. 5 A).
Fig. 9
A
B
Place the gasket (Fig. 9 A) from the bag of screws around
1.
the edge of the flue pipe and push it into the smoke outlet
(Fig. 9 B).
4.5 Mounting side panels
Steel side panels
B C
Fig. 10
A
If rear outlet: Use proper tool to remove the cover
1.
plate (Fig. 10 A) in the side panel (Fig. 10 B).
Lift the side panel and lower it over the bolts (Fig. 10 C
2.
and Fig. 12).
3. Mount the other steel side panel the same way.
Fig. 11
A
Mount the pins (Fig. 11 A) and the clips (Fig. 11 B).
1.
Join the two side panels together using a clip (Fig. 11 C).
2.
3. If rear outlet: Mount an extra clip in the lower part of
the opening (Fig. 11 D).
ENGLISH
A
Fig. 11
Fig. 12
C
C
C
B
D
B
7