Hayward AQUA RITE pro Guia Del Usuario página 40

Electrolytic Cell and Flow Switch:
The electrolytic cell and flow switch cables are terminated with connectors which plug into the
AquaRite Pro for easy attachment and removal. The door of the AquaRite Pro must be open
and the front panel removed to access the cell cable and flow switch connectors. Route the
flow switch cable through one of the knockouts. A cutout in the enclosure is provided for the
cell cable. The diagram below shows the location of these connections.
Optional AQL-CHEM Chemistry Kit
Plug the connector from the AQL-CHEM into the designated connector on the AquaRite Pro
PCB as shown below. For detailed installation and operation information, refer to the AQL-
CHEM instructions.
16 / 20
Flow Switch
Connector
AquaRite Pro
Cell Connector
Connector for
AqL-CHEM
Rev. C