Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CORNER ASSEMBLY
2. From behind the assembly, Insert three wooden
dowels (CC) into the top back holes of mantel,
Attach corner panel (B), secue with five washers
(BB) and five bolts (AA).
Assembly is now complete. With the help of another
person, move the assembly to the final desired
location. Once in final position you may plug the
insert (K) into the power outlet.
Hardware Used
AA
Long Bolt
BB
Washer
CC
Wooden dowel
CHANGE DOOR PANELS
Note: The pre-installed glass door panels can be switched out with the included wood door panel (H).
1. Remove the silicone trim along the outer edges of the glass panel on the inside of the flip down door.
Start at a corner and pull to remove the four pieces. Be careful not to damage the silicone trim as it
will be used to secure the new panel.
2. Remove the glass panel from the door frame, then insert the included wood door panel (H).
3. Using your finger press the silicone trim back into place. Move around the outer edge of the panel
until all four sides are secure.
1
3
1
4
(CONT'D)
(OPTIONAL)
2
2
2
x 5
x 5
x 3
H
9
BB
B
CC
3
1
3
4
AA
2
Publicidad
Tabla de contenido
