FS 140
FS 300
FSX
To ensure that the movable protection hood functions properly when being opened and closed on the guide
rail,the cut-out at the start end has to be large enough.
Please verify that the dimension is 15 mm. (Refer to sketch)
If the dimension is smaller than 15 mm, the cut-out at the start end of the guide rail has to be broadened to 15
mm.
Since the guide rail is made of aluminium, this can be done by means of a saw.
9
Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Safety instruction for use of the MKS 130 Ec on already suppliedguide rails of
the following types:
Order No.: 202870
Order No.: 202869
Order No.: 203802
-28-