Product Exterior; 41910-Hte Transmitter - Leviton 41910-HTE Manual De Instrucciones

HDBaseT Extender – 100M

2. Product Exterior

2.1 41910-HTE Transmitter

1) ON: Blinks green when the device is operational; turns off when the device stops
working.
2) LINK: Twisted Pair cable link status indicator, illuminates green when the
connection between the two devices is successful.
3) IN: HDCP compliance indicator, solid green when the connected device supports
HDCP and works normally; blinks green when the connected device does not
support HDCP.
4) POWER LED: Illuminates red when the power is on.
5) ETHERNET: 10/100Mbps, two-port switch
6) HDBT OUT: Connect to the HDBT IN port of an HDBaseT certified receiver with a
twisted pair cable.
7) HDMI IN: Connect to HDMI source.
Threaded insert is M3 – 0.5mm
a)
8) IR IN: Connect with an IR target (sold separated 41910-HIR)
9) IR OUT: Connect with an IR emitter (sold separately 41910-HIR)
10) RS232: Serial pass through
11) DC 24V: Connect with the included power supply (can be placed at transmit or
receive end).
Leviton Manufacturing Co.
6 7
5
5
1 2 3 4
8 9 10 11
DI-010-41910-25A
www.leviton.com