41910-Hte Receiver; System Connection; System Diagram - Leviton 41910-HTE Manual De Instrucciones

HDBaseT Extender – 100M

2.2 41910-HTE Receiver

1) ON: Blinks green when the device is operational; turns off when the device stops
working.
2) LINK: Twisted Pair link status indicator, illuminates green when the connection
between the two devices is successful.
3) OUT: HDCP compliance indicator, illuminates green when the connected device
supports HDCP and works normally; blinks green when the connected device does
not support HDCP.
4) POWER LED: Illuminates red when the power is on.
5) ETHERNET: 10/100Mbps, two-port switch
6) HDBT IN: Connect to the HDBT OUT port of an HDBaseT certified transmitter with
a twisted pair cable.
7) HDMI OUT: Connect to an HDMI display device.
Threaded insert is M3 – 0.5mm
a)
8) IR IN: Connect with an IR target (sold separately 41910-HIR).
9) IR OUT: Connect with an IR emitter (sold separately 41910-HIR).
10) RS232: Serial pass-through
11) DC 24V: Connect with the included power supply (can be placed at transmit or
receive end)

3. System Connection

3.1 System Diagram

Leviton Manufacturing Co.
6 7
5
6
DI-010-41910-25A
1 2 3 4
10 11
8 9
www.leviton.com