Connection Procedure; Twisted Pair Cable Connection - Leviton 41910-HTE Manual De Instrucciones

HDBaseT Extender – 100M
Router
Twisted Pair Cable
HDMI Cable
IR Cable
RS232 Cable

3.2 Connection Procedure

Step1. Connect an HDMI source (such as DVD player) to the HDMI IN port of the
41910-HTE Transmitter with an HDMI cable.
Step2. Connect the HDBT OUT port of the 41910-HTE Transmitter and the HDBT IN
port of 41910-HTE Receiver, with a single twisted pair cable.
Step3. Connect an HDMI display (such as an HDTV) to the HDMI OUT port of
41910-HTE Receiver with an HDMI cable.
Step4. Both the 41910-HTE Transmitter and 41910-HTE Receiver have IR IN and OUT.
When one unit is used with an IR target, the IR emitter must be connected to the
opposite unit.
For example: When an IR target is connected to the "IR IN" of 41910-HTE
Transmitter, the IR emitter must be connected to the "IR OUT" of 41910-HTE
Receiver.
Step5. To connect to the LAN, one of the four ETHERNET ports of 41910-HTE
Transmitter or 41910-HTE Receiver should be connected to either a switch or
router. The remaining ETHERNET ports can be connected with other LAN
devices.
Step6. Connect the RS232 port to a system controller and controlled device as required.
Step7. Connect the DC 24V power adaptor (one is sufficient as the other end can be
energized via the PoH function).

3.3 Twisted Pair Cable Connection

For best performance, twisted pair cable should be installed in accordance with
Leviton Manufacturing Co.
41910-HTE - Transmitter
H
IR Emitter
DVD 01:52:16
DVD
Computer
System Controller
Computer
7
DI-010-41910-25A
41910-HTE - Receiver
H
Projector
Computer
www.leviton.com
IR Target
1 2 3
4 5 6
7 8 9
0
IR Remote