Lexmark T620 Guia Del Usuario página 15

8
If you intend to operate your 2000-sheet drawer at 100 - 127V power, you
must use the 16 AWG power cord provided with the unit. Plug the 16 AWG
power cord into the back of the drawer and then into a properly grounded
electrical outlet. Do not use the power cord provided with the printer;
however, you may retain it for possible future use. For example, if you later
decide to detach the current printer from the 2000-sheet drawer, and use
the printer with other paper options, you should use the original power cord
provided with the printer. The 16 AWg power cord should always remain
with the 2000-sheet drawer.
If you intend to operate your 2000-sheet drawer at 200 -
240V power, use the power cord provided with the printer.
Plug the power cord into the back of the drawer and then
into a properly grounded electrical outlet.
2000-Sheet Drawer User's Guide
9