Sync.nEt Now; Bluetooth Smart - DeFelsko PosiTector RTR-3D Manual De Instrucciones

Sync .net Now
The below WiFi, USB and Bluetooth menus contain a Sync .net
Now option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication method
(internet connection required).
Alternatively, select Auto Sync .net from within the USB connect
menu to automatically synchroniz e upon connection to a PC.
Additional measurements added to memory while connected are
synchronized only when the USB cable is disconnected and
reconnected, or when the Sync .net Now option is selected.
WiFi connected gages automatically attempt synchronization upon
power-up.
NOTE: PosiSoft Desktop is required when using a USB
connection to synchronize measurements with PosiSoft.net.

Bluetooth Smart

When Enabled , allows communication with a smart device running
the PosiTector App (pg. 24) via auto-pairing Bluetooth Smart (BLE)
wireless technology.
Select batches to flag them for synchronization to the PosiTector
App. New batches created while Bluetooth Smart is enabled are
automatically selected.
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. New batches created while Bluetooth Smart is
enabled are automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
selected batches to the PosiTector App. Only datasets and
batches that have yet to be synchronized with any smart device are
synchronized automatically.
NOTE: If Bluetooth Smart is disabled, data from batches selected
in the Sync Batches menu are held in a queue until communication
with the PosiTector App is re-established.
Advanced models only. S/N 784,000 and greater
27