Nilox 17NXBAON12001 Manual Del Usuario página 33

RACK installation
B1/B2/S1/S2
Use
Front/Back panel

Remove the fastening screws (ID 1) in the front panel and install the batteries (12V@7Ah).

Input connector (ID 2). This connector should be used when a second battery bank is installed or when
there is an external charger.

Output connector (ID 3) to be connected to the UPS (17NXGCON12001 or 17NXGCON11001).

Breaker (ID 4). Turn OFF in the event of maintenance. This cuts the battery bank stripes off from the
chain.
Desktop installation
A1/S3
Use