Supplied Accessories; Mounting The Tv Stand; Symbols Used In This Manual - Magnavox 32MF338B Guia Del Usuario

Supplied Accessories

user manual
(1EMN24119)
• If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free
customer support line found on the cover of this manual.
• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters).
Contact your local electronics store for these items.

Mounting the TV Stand

You must mount the stand to the TV to display upright. Be sure the front and rear of the stand match the proper direction.
1
Spread a thick and soft cloth over a
table.
Place the TV face down onto it.
Make sure not to damage the screen.
At least two people are required at
this step.
To Remove the Stand from this TV
Unscrew the Phillips pan screws indicated by "
and remove the stand from the TV slowly. Be careful not to drop the stand when you
remove it.
Note:
• When mounting the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the TV to fall,
resulting in injuries as well as damage to the TV.
• Make sure to use a table which can support the weight of this TV and is larger than this TV.
• Make sure the table is in a stable location.

Symbols Used in this Manual

The following is the description for the symbols used in this manual.
Description refers to:
: Digital TV operation
DTV
• If neither symbol appears under the function heading, operation is applicable to both.
Products that have earned ENERGY STAR® are designed to protect the
environment through superior energy efficiency.
registration card remote control
(1VMN23233A) (NF800UD)
2
Insert the stand all the way to the
TV slowly until it clicks.
Make sure not to put the AC cord
between the stand and the TV.
", then lift the lever on the bottom stand
1
: Analog TV operation
TV
batteries Phillips pan M4 x
(AAA x 2) 10mm screw for
mounting the stand
x 3 (FPH34100)
3
Drive Phillips pan screws in the 3
threaded holes at the bottom of the
stand with a screwdriver tightly.
screw holes
1
lever
5
EN