Installation
Side Panel Facing Installation
1
Attach the two brackets using the supplied
M4 x 10 mm screws.
1
Directional Vent Installation
Note: The illustrations below show a front door facing installation.
1
Ensure the front door to the wall-mount rack is closed.
1
2
With the unit facing toward either side
panel, place it on top of a wall-mount
rack. Align the bracket holes with the
mounting holes on top of the wall-mount
rack.
Note: Bracket holes will align with a Tripp Lite
rack. Other rack brands may require new holes
to be drilled into them.
2
2
Align the rectangular opening on the directional vent with the
opening on the front of the air conditioner. Push the directional
vent onto the unit. Magnets on the vent surface will hold the vent
onto the unit and wall-mount rack.
Note: Vent will remain attached to the wall-mount rack's front door when
it's opened.
2
5
3
Secure unit to wall-mount rack with the
supplied M6 x 16 mm screws.
Note: If mounting to a rack brand other than
Tripp Lite, user must supply the mounting
hardware.
3