Fcc And Ic Compliance Statements; Warranty Information - Leviton DMX Serie Guia De Instalacion

FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
IC COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
IMPORTANT! Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

WARRANTY INFORMATION

Limited Warranty
Leviton Manufacturing Co Inc. warrants the products represented in this manual to be free of
material and workmanship defects for a period of two years after system acceptance or two
years after shipment from Leviton, whichever comes first.
Leviton Manufacturing Co Inc. warrants the Relay Modules represented in this manual to be free
of material and workmanship defects for a period of ten years after system acceptance or ten
years after shipment from Leviton, whichever comes first.
This Warranty is limited to repair or replacement of defective equipment returned Freight Pre-
Paid to Leviton Manufacturing at 20497 SW Teton Ave., Tualatin, Oregon 97062, USA. User
shall call 1-800-959-6004 and request a return authorization number to mark on the outside of
the returning carton, to assure that the returned material will be properly received at Leviton.
All equipment shipped back to Leviton must be carefully and properly packed to avoid shipping
damage. Replacements or repaired equipment will be returned to sender freight prepaid, F.O.B.
factory. Leviton is not responsible for removing or replacing equipment on the job site, and will
not honor charges for such work. Leviton will not be responsible for any loss of use time or
subsequent damages should any of the equipment fail during the warranty period, but agree
only to repair or replace, at Leviton's option, defective equipment returned to its plant in Tualatin,
Oregon. This Warranty is void on any product that has been improperly installed, overloaded,
short circuited, abused, or altered in any manner. This Warranty does not cover lamps, ballasts,
and other equipment which is supplied or warranted directly to the user by their manufacturer.
Neither the seller nor Leviton is liable for incidental, special, or consequential damages,
including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or
delay or failure to perform this warranty obligation. There are no other implied warranties of any
kind, including merchantability or fitness for a particular purpose, but if any implied warranty
is required by the applicable jurisdiction, the duration of any such implied warranty, including
merchantability and fitness for a particular purpose, is limited to two years.
15