The Product; Choose Between Oven And Hob - THERMEx TOP LINK MODUL III Instrucciones De Montaje

46 THERMEX Top Link III

THE PRODUCT

Thermex Top Link Module can be connected to any type of electric hob and oven, independent of manufacturer.
Top Link sends a wireless signal to the hood when you switch on the hob. The light on the hood turns on and the motor starts at level 2. When
the hob is turned off, the speed of the motor will, after 3 minutes' reaction time, drop to step 1 and go into after-running for 12 minutes.
If Top Link is connected to an oven, the hood's motor will turn on at level 1 when the oven is turned on and continue to run for 20 minutes after
the oven has been turned off.
NOTE: You can overmodulate Top Link with the hood's control at any time.

CHOOSE BETWEEN OVEN AND HOB

Top Link can be used together with all types of hobs and ovens, and it can thus be necessary to adjust Top Link to the specific hob or oven with
which it is to be used.
ADJUSTMENT OF DIP SWITCH
There are different programmes for Top Link, depending on whether it is a hob or an oven. The dipswitch is set to the selected product.
NOTE: The power must always be disconnected from the transmitter before the dipswitch is set.
It is set on dipswitch 1 whether it is a hob or an oven.
ON
1 2 3 4
Kogeplade
DIP
1. Dipswitch
2. Grøn diode - indikator for opkobling
1
3. Gul diode - indikator for sætpunkt
2
4. Knap til sætpunkt
5. Knap til opkobling
3
6. 230/400V input
4
7. Sikring 5A
5
8. 230/400V output (kogeplade/ovn)
6
7
8
ON
1 2 3 4
Ovn
M 536991350901122020
DIP