Adjusting Top Link - THERMEx TOP LINK MODUL III Instrucciones De Montaje

M 536991350901122020

ADJUSTING TOP LINK

NOTE: The power must always be disconnected from the transmitter before the dipswitch is set.
The hood starts as standard at level 2 when the hob is turned on. If it is prefered to start the hood at level 3 instead, this can be set on dipswitch 2.
ON
1 2 3 4
The hood turns on at level 2.
If dipswitch 3 is set to ON, there will be a delay before the hood is turned on.
If Top Link is connected to a hob, the delay will be around 10 seconds. If it is an oven, the delay will be around 30 seconds.
ON
1 2 3 4
Delay is activated.
As default, the light is turned on when the hood goes into after-running when the hob is turned off. If you want the light to turn off when the hood
goes into after-running, it can be set via dipswitch 4.
NOTE: This ONLY applies when connecting to the hob.
ON
1 2 3 4
The light is turned on in the after-running.
DIP
DIP
DIP
ON
1 2 3 4
The hood turns on at level 3.
ON
1 2 3 4
Delay is deactivated.
ON
1 2 3 4
The light is off during after-running.
THERMEX TOP LINK III
DIP
DIP
DIP
49