9 ADJUSTMENTS
driver leaves his/her seat) must be checked for proper function
If malfunctions are detected, the vehicle must not be driven.
– INCREASED RISK OF ACCIDENT –
Loads must not be placed on seats with a built in switch, except for the driver's weight during normal use, as the
vehicle may otherwise start to move by itself.
– INCREASED RISK OF ACCIDENT –
If you take off the weight from the seat while driving, this will cause the vehicle to stop.
Do not indent the bellows while there is load on the driver's seat.
– RISK OF CRUSHING –
Make sure that the interior of drivers seat remains free of foreign particles or liquids.
The driver's seat is not watertight and must be protected against splashes of water!
Any conversion or refitting work on a GRAMMER driver's seat must be performed exclusively in authorised
workshops by trained or suitably qualified personnel and in adherence with the applicable operating,
maintenance and installation instructions and in compliance with all relevant national regulations.
Improper installation and assembly bear the risk of personal injury or property damage and the proper function
of the driver's seat or mounted parts can no longer be guaranteed.
GUARANTEE
GRAMMER can provide no guarantee for damage resulting from incorrect assembly, use
or repair of the driver's seats.
Further details on the guarantee granted by GRAMMER are stated on the invoice or the
delivery note. Warranty claims against GRAMMER beyond the guarantee obligations described there are
excluded.
en-59