Tabla de contenido
Publicidad
2
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
spout
valves
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This faucet requires ½" hot and cold supply lines
(not included).
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
This unit is listed by IAPMO for use in
the USA and Canada.
This unit meets or exceeds the following:
•
ASME A112.18.1
•
CSA B125.1
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.5 GPM
1½"
1¼"
1³⁄₁₆"
Publicidad
Tabla de contenido
