Headphone Set Description; Recharging The Headset; Recharging Cradle/Transmitter; Supplied Accessories - RCA WHP151 Manual De Instrucciones

WHP151 US IB REVC_K.qxd 4/30/07

HEADPHONE SET DESCRIPTION

5 Stereo LED indicator light
6 VOLUME control
7 AUTO SCAN button
5

RECHARGING THE HEADSET

To recharge the headset unit verify that the ON/OFF Switch is in the
OFF position. Place the headphones into the recharging
cradle/transmitter with the red Power LED indicator light (4) on the
right headphone facing the front of the unit. The contacts (3) on the
right headphone should come into contact with the charging prongs (3)
on the cradle/transmitter. Rotate the headphone toward the back of the
unit to lock headphone into charging position. If the headphones are
placed correctly, the charging contact leads (3) will touch the charging
prongs (13). At that point, the red
charging LED indicator light on the

recharging cradle/transmitter

(8) illuminate.
On indicator:
correct recharge
Off indicator:
incorrect
recharge
6
9:42 AM Page 6
(continued)
7
6
RECHARGING CRADLE/TRANSMITTER
The recharging cradle/transmitter acts both as a transmitter of the
signal to the headphones as well as the recharging base.
10 11 12
8 Charging LED indicator light
9 Audio signal LED indicator light
10 DC IN power supply socket
11 Left and Right AUDIO inputs
12 CHANNEL switch
13 Charging prongs

SUPPLIED ACCESSORIES

This headphone system includes accessories that enable you to use your
wireless headphone set in a number of ways. (See section on Operation
and Standard Usage, page 10)
Main power adapter
(AC/DC: 120 V ~ 60 Hz, 12 V = 150 mA)
RCA to 3.5mm cable
3.5mm/.25 inch jack adaptor
13
8 9
7