Fault/Remedy; Declaration Of Conformity - ADE KA 1801 Instrucciones De Operación

Fault/Remedy

Fault/Remedy
Fault
No function.
Meat is poorly processed.
Meat becomes hot, grey or greasy
during cutting.
The motor is blocked.
The device switches off during use.

Declaration of Conformity

Waagen-Schmitt GmbH hereby declares that the mincer KA 1801 complies with EU
directives 2014/30/EU, 2014/35/EU, and 2011/65/EU.
This declaration loses its validity if modifications are made to the product without our
approval.
Hamburg, January 2020
Waagen-Schmitt GmbH
40
Possible Cause
Check if the power cord is plugged.
Check that you have mounted the cross
blade properly (see Fig. 4).
The cross blade is blunt and must be
replaced with a new one. Replacement
cross blades can be reordered for a fee.
Please email us at our service address:
service@ade-germany.de
Use the reverse function to remove
jammed meat from the filling tube; see
section "Reverse function".
The overheat protection has tripped; see
section "Overheat protection".
Mincer KA 1801