Disassembly And Transport - Chicco 360 Manual De Instrucciones

8. To adjust the seat position, lift the handle (D) located on
the backrest of the seat by extracting the pin from the
tube (figure 12), and turning the chair seat in a clock-
wise or counterclockwise direction (figure 13) until the
360° symbol located on the rotating part of the seat (B)
is aligned with the selected symbol located on the fixed
part of the chair seat (C). Once the indicated position is
reached, release the rotation handle so that the locking
pin engages in the hole in the tube: an audible click indi-
cates that the pin engaged correctly.
The chair has six positions:
- 1 "FEEDING BOTTLE" position (figure 14 and figure 14a),
2 "BISCUIT" positions (figure 15 and figures 15a/15b): the
360° indicator is positioned in correspondence of the
"FEEDING BOTTLE/BISCUIT" symbol on the tube of the seat
(C). the child is facing outwards and is able to drink from
the feeding bottle or eat a snack independently, always
keeping the visual contact with his mum, who is able to
move freely in the surrounding area.
- 2 "CUP" positions (figure 16 and figures 16a/16b): the 360°
indicator is positioned in correspondence of the "CUP"
symbol on the tube of the seat (C). The moment of wean-
ing is experienced with the correct contact between the
ert child and his mum. The child is able to pick up the cup lo-
wn cated on the table on his own while the mother is able to
be in a correct position near her child while feeding him.
of
es - 1 "CUTLERY" (figure 17 and figure 17a): the 360° indicator
is positioned in correspondence of the "CUTLERY" symbol
ere
m- on the front part of the fixed structure (C). Once the child
nd has acquired greater autonomy, he faces towards the ta-
se ble and is able to enjoy being at the table together with
er- his mum and dad.
WARNING! do not adjust the seat to a position of use other
than those indicated in this instruction booklet. The seat
must never be adjusted while the child is sitting in it. In this
ws case it can be slightly more difficult.
he WARNING! While adjusting the seat, make sure that the
child's legs can freely follow the movement of the seat.
ntil
HOW TO REMOVE THE FABRIC COVER
ng
ure The cover of the hook on chair can be removed for washing.
9. Unfasten the safety harness and remove it from the plas-
act tic "D" rings.
10. Unfasten the 4 snap buttons integrated in the fabric
G) (figure 18a and 18b).
ed 11. Remove the plastic "D" rings, making them pass through
tic the openings in the seat fabric.
ey 12. Remove the two rear metal hooks of the seat, making
ng them pass through the seats in the backrest and the
on- three metal front hooks through the seats along the
front edge of the seat (figure 19a and 19b). At this point,
ce.
his the fabric can be removed.
13. Unfasten the snap button located on the seat (figure 20)
and remove the HDPE insert.
g it
ng To recover the chair, proceed as follows.
wn 14. Insert the HDPE insert on the bottom of the chair and
or- close the snap button.
15. Insert the metal hooks through the specific seats and
make sure that they are correctly blocked as shown in
figure 21a and 21b.
16. Pass the plastic "D" rings through the openings in the
seat fabric.
17. Clasp the snap buttons in the fabric to the seat structure.
18. Pass the safety harness through the plastic "D" rings. At
this point, the seat is ready to be used.

DISASSEMBLY AND TRANSPORT

Proceed as follows for product disassembly.
19. Press the locking pins located in the arms (G - H) and
pull them out of the seat.
20. Insert the seat (A) and the two disassembled arms in the
provided mesh bag (figure 22). The product is ready to
be transported.
WARRANTY
The product is guaranteed against any conformity defect in
normal conditions of use as provided for by the instructions
for use. The warranty shall not therefore apply in the case
of damages caused by improper use, wear or accidental
events. For the duration of warranty on conformity defects
please refer to the specific provisions of national laws appli-
cable in the country of purchase, where provided.
FOR FURTHER INFORMATION, PLEASE CONTACT:
ARTSANA UK Ltd.
Prospect Close - Lowmoor Road
Industrial Estate - Kirby in Ashfield
Nottingham NG 17/7 LF - England
U.K.
Tel. +44 1623 750870 (office hours)
www.chicco.com
11