Should you experience any problems with your
washing machine, it has the capability
of transmitting
data via your telephone to the Kenmore Connect
Team. This gives you the capability
of speaking
directly to our specially trained technicians. The
technician records the data transmitted
from your
machine and uses it to analyze the issue, providing a
fast and effective diagnosis.
If you experience problems with your washer, call
1-800-4-MY-HOME
®. Only use the Kenmore Connect
System feature when instructed to do so by the
Kenmore Connect Team. The transmission sounds that
you will hear are normal and sound similar to a fax
machine.
Kenmore Connect cannot be activated
unless your
washing machine is turned on by pressing the POWER
button. If your washing machine is unable to turn
on, then troubleshooting
must be done without using
Kenmore Connect.
1
Using the I(enmore
Connect
TM
System
Firsb call 1-800-4-MY-HOME®
(1-800-469-4663).
If the number of the phone you are using is on file and is
associated with your washer, you will be quickly relayed to a I<enmore Connect team agent. Follow the technician's
instructions and perform the following steps only when requested to by the Kenmore Connect Team agent.
HOLD the mouthpiece of your phone over the POWER button, when instructed to do so by
the call center, no more than one inch from (but not touching) the machine.
NOTE: Do not press any other buttons or turn the cycle selector knob.
PUSH and hold the WASH TEMP button while continuing to hold your phone to the
POWER button.
LISTEN for three beeps. After you hear the three beeps, release the "WASH TEMP button.
Keep the phone in place until the tone transmission has finished. This takes about 6 seconds,
and the display will count down the time. Once the countdown is over and the tones have
stopped, resume your conversation with the technician, who will then be able to assist "you
in using the information
transmitted
for analysis.
NOTE:
• For best resuffs, do not move the phone while the tones are being transmitted.
° If the call center
agent is not able to get an accurate
recording
of the data,
you may be
asked
to try again.
26