Champion IUH 351 Instalación Y Operación, Manual De Servicio Y Partes De Reemplazo página 16

Cleaning and Maintenance
Cleaning
At the End of the Day
1. Remove the upper and lower rinse and wash spray arms. The spray arms are interchangeable.
Unscrew the rinse arm pin (A). Remove the rinse arm assemblies
2.
Clean the final rinse arm nozzles using a small paper clip (B).
3.
Remove the rinse arm end plugs (C) if necessary, and flush the rinse arm with clean water.
4.
5. Re-install the rinse arm end plugs if they were removed.
Remove the wash spray arms and flush with clean water.
6.
DO NOT USE STEEL WOOL TO CLEAN THE INTERIOR OF THE MACHINE.
7.
8. Contact the chemical supplier for de-liming if required (see next page).
9. Wipe the interior and exterior of the machine with a soft cloth and a mild detergent.
DO NOT HOSE THE EXTERIOR OF THE MACHINE WITH WATER.
10. Reassemble the dishwasher and leave the door open to allow overnight drying.
End
Plug
C
Wash Spray arm
D
10
Paper Clip
B
Rinse Arm Pin
A