English; I625Ptz Recessed Indoor Flush Mount Housing; To The Installer; What's In The Box - American Dynamics i625PTZ Guía De Referencia Rápida

i625PTZ Recessed Indoor Flush Mount Housing

To the Installer

This guide assumes that the indoor mounting structure to which the housing is attached is in place
and that data and power cables have been pulled to the installation site.
1. The installation shall be performed by a qualified person in accordance to all local regulations.
2. External power source must be a NEC class 2 / Certified Limited Power Source (LPS)

What's in the box

Standard Items

• Recessed Indoor Flush Mount Housing including Camera Mounting Spider
• Quick Reference Guide
• Safety Wire
• Cable Tie
• Cutout Template

Mounting Requirements

• Height above ceiling: 170mm (6.7in)
• Diameter: 192mm (7.5in)
• Structural members: Verify that ceiling members can support the camera dome and mounting
structure, if used.
• Weight Fully Assembled: 3.5Kg

Tools Required

• 6.6mm (1/4in) fixed-handle nut driver for Torx bit
• Wire cutters and strippers
• 2.5mm (0.1in) slotted screwdriver
• Power Drill

English

1