American Dynamics i625PTZ Guía De Referencia Rápida página 21

d Secure the camera mounting spider to the housing by tightening the three screws on
the housing flange as seen in Figure 15.
14 Remove the bubble assembly from the package and ensure that the bubble is clean and
free of debris.
15 Attach bubble assembly:
a Attach the lanyard on the housing to the trim ring on the bubble assembly as shown
in Figure 16.
b Center the trim ring over the housing and align its locking tabs with the mating tabs in
the housing.
c Offer up the trim ring to the housing ensuring that the lanyard collapses as seen in
Figure 17.
English i625PTZ Recessed Indoor Flush Mount Housing
Figure 15
Figure 16
11