AL-KO UP4 Manual De Instrucciones página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 76
Fig. 2
Designation
N
Red overload LED
P
Blue automatic function LED
R
Red control LED
Extend function
S
Extend button in individual
mode
T
Rear left support leg button
U
Front left support leg button
Notes on the remote control
ADVICE
Read the operating manual of your "AL-KO RANGER manoeuvring system" for the functions of
the operating and control elements in "manoeuvring mode"!
CAUTION!
The main switch (2G) on the remote control also serves as an emergency stop switch.
The remote control switches off automatically:
After approx. 3 minutes if no buttons on the remote control are pressed:
After approx. 2 minutes, an acoustic signals sounds 5 times.
After approx. 3 minutes, this is repeated and the system switches to standby mode.
1659595_a
1659595_a BA UP4 El_Caravanstütze ESS1 DIN A5 sw.pdf 29
Function
If the overload protection system is activated, red overload LED (2N)
has a steady light.
ADVICE
Switch off the system, allow to cool down and try again after
approx. 60 seconds.
Blue LED (2P) flashes when function "Automatic raise" or "Automatic
lower" is selected.
Blue LED (2P) has a steady light as long as the support legs are being
lowered or raised automatically.
Red control LED (2R) lights up as long as the lower
function is selected.
Serves to select the lower function for individual support legs.
1.
Press button (2S).
Red LED (2R) has a steady light.
The support legs can now be lowered individually by pressing the cor-
responding buttons.
ADVICE
The buttons for the individual support legs have no function as
long as the lower button is not activated.
If no other button is pressed within 30 seconds, red LED (2R)
goes out and the function is deactivated again.
1.
First select the raise or lower function
(2A or 2S).
2.
Press button (2T).
Depending on the selected function, rear left support leg (3B) is
raised or lowered.
1.
First select the raise or lower function
(2A or 2S).
2.
Press button (2U).
Depending on the selected function, front left support leg (3A)
is raised or lowered.
en
29
08.11.2017 11:19:34

Publicidad

Tabla de contenido
loading

Productos relacionados para AL-KO UP4

Tabla de contenido