System Functions - Denon DRR-M33 Instrucciones De Operación

ENGLISH
10

SYSTEM FUNCTIONS

2 Operation is even easier when the components in the RCD-M33/M35DAB is connected to the DRR-M33
with system connections. (For instructions on connections, refer to "CONNECTIONS" on page 5 and refer to
the respective operating instructions of CD receiver (RCD-M33/M35DAB).)
2 The system functions will only work when the RCD-M33/M35DAB is connected. They will not work with
other components. To use the system functions, connect the CD receiver (RCD-M33/M35DAB).
(1) System Remote Control
2 When the DRR-M33 is used in a system with the RCD-M33/M35DAB, it can be operated with the system
remote control unit included with the CD receiver (RCD-M33/M35DAB).
The illustration used in the operation description is for the system control unit (RC-999) supplied with the
RCD-M33/M35DAB.
2 When system connections are made, all the remote control signals are received at the RCD-M33/M35DAB's
remote sensor.
2 The buttons on the remote control unit function in the same way as the corresponding buttons on the set.
(Refer to "PART NAMES AND FUNCTIONS" on page 6.)
2 For instructions on operating the CD receiver (RCD-M33/M35DAB), refer to the respective operating
instructions.
2 The system function signals for operating the components in the D-M33 series are all output from the CD
receiver (RCD-M33/M35DAB). Thus, when making system connections, be sure to connect the CD receiver
(RCD-M33/M35DAB).
10
2 Names of remote control unit buttons (cassette deck section)
6 (rewind) button
Press this button to rewind
the front side of the tape.
(The back side of the tape is
fast-forwarded.) Also use
this button to search for the
beginning of the current
selection when playing in
the forward ( 1 ) direction, or
to search for the beginning
of the following selection
when playing in the reverse
( 0 ) direction.
0 (reverse play) button
Press this to start playback
or recording in the reverse
direction.
LINE button
Press this button to switch
the function LINE.
The input changes in the
following order each time
this button is pressed.
TAPE AUX
7 (fast-forward) button
Press this button to fast-
forward the front side of
the tape. (The back side of
the tape is rewind.) Also
use this button to search
for the beginning of the
following selection when
1
playing in the forward ( )
direction, or to search for
the beginning of the current
selection when playing in
the reverse ( 0 ) direction.
1 (forward play) button
Press this to start playback
or recording in the forward
direction.
2
(Stop) button