Troubleshooting; Other Information; Specifications - Denon DRR-M33 Instrucciones De Operación

11

TROUBLESHOOTING

Check the following before you draw the conclusion that your Stereo Cassette Deck is malfunctioning:
1. Are all the connections correct?
2. Are all system components being operated correctly in accordance with the operating instructions?
3. Are the speakers and amplifier/receiver functioning correctly?
If the tape deck still does not function properly, check the symptom against the list below. If the symptom does
not correspond to the check list, please contact your DENON dealer.
Symptom Cause
Recording does not • No cassette tape is loaded.
start when REC button • Accidental erasure protection
is pressed. tabs are broken off.
Sound is broken or no • Heads are dirty.
sound is produced • Cassette tape is defective.
during recording and
playback.
• Noise from a TV.
Humming sound is
(Noise may be produced by
heard while playing
some types of TVs.)
cassette tapes.
Wow (shaky sound) is • Capstans or pinch rollers are
heavy during recording dirty.
or playback.
• CD receiver (RCD-M33/M35DAB)
setup is not proper.
System functions do not
work.
Countermeasure Page
• Load a cassette tape. 7
• Cover the tab holes with 6
cellophane tape.
• Clean the heads. 6
• Replace the cassette tape. –
• Move the TV away from the 4
system.
• Turn the TV off. –
• Clean them. 6
• Set up the CD receiver (RCD- –
M33/M35DAB) properly. (Refer to
"SETTING UP THE UNIT" on the
RCD-M33/M35DAB's operating
instructions.)
12

OTHER INFORMATION

Cleaning the Heads
• If the cassette deck's head are dirty, tapes cannot
be played or recorded with good sound quality.
• To take full advantage of all the performance this
cassette deck has to offer and ensure good quality
sound, clean the heads periodically after approximately
10 hours of use, using a commercially available cleaning
cassette.
NOTE:
• Some commercially available cleaning cassettes
are highly abrasive and may damage the heads.
Avoid using such cleaning cassettes.
13

SPECIFICATIONS

Type: Horizontal 4-track 2-channel stereo auto reverse cassette deck
Heads: 1 hard permalloy recording/playback head
1 double-gap ferrite erasing head
Tape speed: 4.75 cm/s
Noise reduction: Dolby B NR
Usable tapes: Normal, High (TYPE
The metal tapes (TYPE
Power supply: AC 230 V, 50 Hz
Power consumption: 9 W
Maximum external dimensions: 210 (W) x 95 (H) x 325 (D) mm
(including feet, controls and terminals)
Mass: 3.1 kg
* Maximum dimensions include controls, terminals, and covers.
(W) = width, (H) = height, (D) = depth
• For improvement purposes, specifications and functions are subject to change without advanced notice.
2 Manufactured under license from Dolby Laboratories.
2 "DOLBY" and the double-D symbol are trademarks of Dolby Laboratories.
ENGLISH
Demagnetizing the Heads
• The heads become magnetized after they have
been used for an extended period of time or if they
are exposed to a magnetic object. This results in
noise or a loss of the treble sound.
• If the heads are magnetized, use a commercially
available cassette-type head demagnetizer to
demagnetize them.
I II
, )
IV ) can only be used for playback
13