Handicare SIMPLICITY Manual De Instalación página 35

Simplicity+ DIP Settings MS125 board for Left and Right Hand Slide Track
NO CONNECTION REQUIRED
POWER FOOTPLATE
DIAGNOSTIC DISPLAY
EXTERNAL DIAGNOSTIC
NO CONNECTION REQUIRED
INFRARED/RADIO
HINGE DATA (GREY CABLE)
+24V FUSED
MOTOR 1 (WHITE)
MOTOR 2 (BLACK)
BATTERY NEGATIVE
IF ANY DIP SWITCHES ARE CHANGED,
PLEASE TURN OFF LIFT, WAIT 10 SECONDS,
THEN POWER THE LIFT BACK ON.
Slide Track DIP switch settings
9 WAY CONNECTOR 8 WAY CONNECTOR
ON
ON
1 2 3 4
1 2 3 4 DIP SWITCH 2
DIP SWITCH 1
SLIDETRACK SCHEMATIC - LH+RH
BATTERY POSITIVE
CSE126EL SLIDETRACK CONTROLLER PCB
SLIDETRACK SCHEMATIC - LH+RH
CSE126EL SLIDETRACK CONTROLLER PCB
Slide Track schematic
JUMPER MUST BE PRESENT
ON THIS TWO WAY CONNECTOR
BLACK
JUMPER MUST BE PRESENT
TOP
ON THIS TWO WAY CONNECTOR
LIMIT
BLACK
BOTTOM
GREY
LIMIT
BLACK
GREY
TOP
LIMIT
BLACK
NORMALLY OPEN
TRACK SAFETY EDGES
SWITCHES USED FOR
BOTTOM
GREY
END-OF-TRAVEL LIMITS
LIMIT
GREY
NORMALLY OPEN
TRACK SAFETY EDGES
SWITCHES USED FOR DIP SWITCH UNUSED
END-OF-TRAVEL LIMITS
DIP SWITCH UNUSED
NORMALLY CLOSED SWITCHES USED
FOR TRACK SAFETY EDGE LIMITS
NORMALLY CLOSED SWITCHES USED
FOR TRACK SAFETY EDGE LIMITS
INFRARED/RADIO
LEARN BUTTON
FRONT PANEL
LED CONNECTION
BRAKE CONNECTOR
CHARGE+
DIP SWITCH SETTING CSE126EL (ON SLIDE TRACK)
SLIDE TRACK
MOTOR
SLIDE TRACK
MOTOR
M2 M1
A M2 M1
GREY
A
BLACK (0V)
GREY
BLACK (0V)
A
A
HANDICARE SIMPLICITY INSTALLATION MANUAL 35
Appendix 4
DIP SWITCH SETTING MS125
ON ON
DIP 1
1 2 3 4 1 2
ON
1 2 3 4
THESE DIP SWITCHES ARE UNUSED
TRACK COMMS
CONTACT
TRACK COMMS
CONTACT
DIP 2
3 4