Triton TW SS10 Instrucciones De Funcionamiento Y Seguridad página 8

of the blade to the side face of the stone
• Move the face of the blade slowly over the face of the
stone. Do not apply excessive force, and avoid fingers
coming into contact with the stone
• Carry out this procedure first, before you sharpen the
blade
MAINTENANCE
• Disconnect the machine from mains power before
carrying out any maintenance work
• Keep the unit clean and free from dust and debris.
Clean the outside of the unit with a damp cloth. Never
immerse the unit in water
• Check that all moving parts move freely and are in
good working condition
• Check that all nuts and bolts, especially those
retaining the honing wheel and grindstone, are
correctly fastened and free from wear
• Check the plug and power cable for signs of wear
or damage. If damaged, have them replaced by a
certified electrician
GRINDSTONE
• Do not use a grindstone that has received a blow,
especially to the side of the stone
• Replace a cracked or suspect stone
• See 'Assembly' for guidance on fitting a stone. Note
that the spindle is reverse thread: turn clockwise to
loosen, anti-clockwise to tighten
WARRANTY
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not be made available to any third party.
GB
PURCHASE RECORD
Date of Purchase:
Model: TWSS10
Serial Number: __________________
Retain your receipt as proof of purchase
Operation / Warranty
8
___ / ___ / ____
AFTER USE
1. Disengage the drive system by loosening the Torque
Adjustment Knob (10) This will help to ensure the drive
wheel retains perfect shape
2. Empty the water trough. Do not leave the grindstone
standing in water
REPLACING THE LEATHER HONING WHEEL
If the Leather Honing Wheel (1) becomes worn or torn, it
should be replaced:
1. Unscrew and set aside the Torque Adjustment Knob
(10)
2. Remove the worn honing wheel from the spindle, and
position new wheel in its place
3. Re-fit the locking knob and tighten.
NOTE: Tighten by hand only
Triton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to
be defective due to faulty materials or workmanship
within 12 MONTHS from the date of original
purchase, Triton will repair, or at its discretion
replace, the faulty part free of charge.
This guarantee does not apply to commercial use
nor does it extend to normal wear and tear or
damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights