Language Settings; Standby Mode - ADURO P2 Manual De Usuario

n2-3-44 SATURDAY
n2-3-45 SUNDAY
7.2.4 Weekend programming
This program allows you to set one time period for Saturday and one for Sunday.
Enter menu 2, press button 2 (three times) to continue to menu 2-4. Then use button 3 to scroll through the
different levels within this menu in the order shown in the table below (n2-4-01 to n2-4-09). Use the buttons 1
and 2 to change the respective values.
The weekend programming mode must be enabled (n2-4-01
to the timer.
WEEKEND PROGRAMMING
menu level setting
n2-4-01 WEEKEND CHRONO
n2-4-02 START 1 WEEKEND (SAT)
n2-4-03 STOP 1 WEEKEND (SAT)
n2-4-04 Set Pot 1
n2-4-05 Set Temp. 1
n2-4-06 START 2 WEEKEND (SUN)
n2-4-07 STOP 2 WEEKEND (SUN)
n2-4-08 Set Por 2
n2-4-09 Set Temp. 2

7.3 Language settings

Enter the language setting menu by pressing and holding button 1. Press button 2 until you reach menu 3
and confirm with button 3. Scroll through the languages with button 2 and confirm the chosen language with
button 3.
The available languages are listed in the following order: ITA, ENG, FRE, DEU, SPA, POR.
7.4 Stand-by mode
The STAND-BY mode allows the stove to automatically turn off when the measured temperature exceeds
the set room temperature with 2 °C and will turn back on when the measured room temperature is 2 °C
below the set room temperature.
Enter menu 4, then choose ON or OFF by pressing button 1 or 2. Confirm your choice with button 3.
7.5 Sound alerts
The stove will make you aware of any potential alerts with a beep sound.
Enter menu 5, then choose ON or OFF by pressing button 1 or 2. Confirm your choice with button 3.
ON) in order for the stove to work according
meaning
Enable weekend chrono
Start time
Stop time
Heat Level
Wanted room temperature
Start time
Stop time
Heat Level
Wanted room temperature
ON/OFF
ON/OFF
available values
ON/OFF
OFF-00:00-23:50
OFF-00:00-23:50
01-05
... C
OFF-00:00-23:50
OFF-00:00-23:50
01-05
... C
55