Generac OneWASH Power Washer Manual Del Operador página 20

2. Turn the Power Dial so that it matches the material
you would like to clean (Figure 4-19).
Car icon - This setting is best for cleaning
cars, boats and RV's as it delivers the right
balance of power and flow to clean these
types of surfaces effectively.
House Icon - This setting is best for clean-
ing vinyl and aluminum siding on your
home, as it delivers the right balance of
power and flow to clean these types of sur-
faces effectively.
Wood Fence Icon - This setting is best for
cleaning wood decks fences and siding on
your home, as it delivers the right balance
of power and flow to clean these types of
surfaces effectively.
Brick Icon - This setting is best for clean-
ing brick, concrete and masonry materials,
as it delivers the right balance of power and
flow to clean these types of surfaces effec-
tively.
PRESSURE CONTROL
DELICATE
2000 PSI
Figure 4-19. Power Dial
3. To remove persistent stains on concrete or masonry
surfaces, use the red blast nozzle within the stained
area (Figure 4-20).
This tip (Red Nozzle) can damage work sur-
face if it is too close or held in one position for
an extended time.
16
• When applying detergent, use only the black nozzle
HEAVY DUTY
3100 PSI
Figure 4-20. Blast Pressure Nozzle (Red)
(Figure 4-21). Only use power washer safe detergents/
soaps to help break down stubborn dirt and grime on a
variety of surfaces.
Figure 4-21. Detergent Nozzle (Black)
Set-up
OneWASH™ Power Washer