Instructions Of Use - Hergom DERO Instrucciones Para Instalación, Uso Y Mantenimiento

Insert the screws and bolts in the holes.

4 - INSTRUCTIONS OF USE

DRAW ADJUSTMENT VALVE.
FIG. 13
FIG. 9
FIG. 10 FIG. 14
The draw adjustment valve regulates the draw in
the case it is excessive.
Before installing the device on site, adjust the valve
to the position you desire. (Right, Front, Left)
You should only take into account the need to
maintain the orientation of the parts in the same
position regarding the axis of the valve. This will
mean that the valve lever will indicate whether it is
open or closed correctly.
The square tube can be cut to adjust the lever to
FIG. 11
the wall casing wall. Cut the side without holes.
To regulate the fire, adjust the chimney valve.
If there are no excessive draw issues, it is advisable
to leave the valve open and regulate combustion
using the primary and secondary adjustment
controls located on the fireplace door.
BEFORE OPENING THE FIREPLACE DOOR MAKE
SURE THE DRAW ADJUSTMENT VALVE IS OPEN.
For installations with poor draw remover
vermiculite baffle part.
FIG. 12