Dolphin 12V-30A Manual De Instrucciones página 6

To begin
•
All 6 LEDs will flash for 5 seconds
• Initialization of the CPU
• Charge position is changing
Absorption phase (6 hrs max.)
• LED "Power On" is on
• LED "Boost" is on
• Batteries are in Absorption phase
Equalization Phase (4 hrs)
• LED "Power On" is on
• LED "Boost" is flashing
• Batteries are in equalization phase
Floating Phase
• LED "Power On" is on
• LED "Float" is flashing
•
Batteries charged and in floating phase
Internal temperature fault
• LED "Power On" is flashing
• LED "Temp" is on
• Internal temperature fault
• The charger is on stand-by for 30 seconds
•
Check the installation and climatic conditions
•
Check the internal fan is operational
•
Check charger's confinement
Faulty Battery Temperature - optional
• LED "Power On" is flashing
• LED "Temp" is flashing
• External temperature fault
• The charger is on stand-by for 30 seconds
•
Check the installation and climatic conditions
•
Check the external sensors
Faulty external sensor - optional
• LED "Power On" is flashing
• LED "Temp" is flashing
• LED 'BAT' is flashing
• Faulty external sensor temperature
• The charger is on stand-by for 30 seconds
•
Check the external sensor connections
Faulty output load
• LED "Power On" is flashing
• LED 'BAT' is on
• Faulty output load
• The charger is on stand-by for 30 seconds
•
Check external sensor
•
Check state of electronic card
Operating instructions
Page 6
POWER.ON
BOOST
POWER.ON
BOOST
POWER.ON
FLOAT
POWER.ON
Temp
POWER.ON
Temp
POWER.ON
Batt
Temp
POWER.ON
Batt