Rear Panel - Lorex L200 Serie Manual De Instrucciones

Rear Panel

Rear Panel
1 2 3
1 LAN Port
2 VGA Port
3 Video OUT
1. ETHERNET CONNECTION – Connects the system to a router for connection to the Local Network
and Internet.
2. VGA VIDEO OUTPUT – Video Output port to connect the unit to a Computer Monitor. Directly reflects
the current onscreen images.
3. BNC VIDEO OUT (1 & 2) – Video Output ports to connect the unit to the video input of a TV or
Observation System. Directly reflects the current onscreen images.
4. RCA AUDIO OUT / IN PORTS – Connection ports for Audio:
•
AUDIO OUT - Audio Output port to connect the unit to a TV or Observation System.
•
AUDIO IN - Connect One Audio input device such as a microphone to record Audio on
one channel.
5. BNC VIDEO INPUTS – Channel 1~4 (L204/L214 Series) -or- Channel 1~8 (L208/L218 Series) camera
inputs (used to connect Cameras with BNC connection type). Cameras with BNC connections
require an additional power adapter.
6. PS/2 PORT – Connection port for a PS/2 type mouse.
7. ALARM FUNCTION TERMINALS (INPUT/OUTPUT) - These terminals are used to connect external
alarm devices such as motion sensors or door/alarm sensors. Refer to Appendix G for Alarm Block
Configuration.
8. RS-485 / PTZ CAMERA TERMINALS - These terminals are used to control PTZ (Pan/Tilt/Zoom)
type cameras. Refer to Appendix F for PTZ Configuration
9. POWER INPUT – Connect to the DVR Power using the power cord provided with the unit. The power
cable connects the DVR to an electrical outlet.
10. POWER SWITCH – Turns the system ON or OFF.
12
4 5
4 Audio IN/OUT
5 Video IN
6 PS/2 Port
6 7 8 9
7 Alarm Block
8 RS-485/PTZ Block
10
9 Power Input
10 Power Switch