Onscreen Symbols - Channel Symbols; Onscreen Symbols - Status Bar - Lorex L200 Serie Manual De Instrucciones

CH5 CH6
CH7 CH8
100%
QUAD2 (CH 5~8) – Press the CH5 button to
display the Quad View (L208/L218 only)
Onscreen Symbols – Channel Symbols
The following symbols appear on a channel to indicate the status of the channel:
Indicates that the channel is currently recording video.
Indicates that Motion has been detected on the channel.
Indicates that a Sensor (Alarm) has been signaled on the channel.
Indicates that there is no video signal coming from the camera.
NOTE: If the screen is blue and not displaying this symbol, check the camera connection.
Onscreen Symbols – Status Bar
Indicates that DVR is in monitoring mode.
Indicates that a network user is connected to the system.
Indicates that alarm on system has been activated.
% Displays the amount of space used on the hard drive.
Indicates that the DVR is in continuous recording mode.
NOTE: Data will be overwritten when the drive is full.
07/01/01 01:02:03
CH1 CH2
CH4 CH5
CH7
CH8
100% 07/01/01
9-CHANNEL VIEW – Press the ENTER Button
to display all cameras (L208/L218 only)
Display Modes
CH3
CH6
01:02:03
19