Instructions For Use; Preparing The Appliance - BALAY 3XM4H Serie Instrucciones De Uso

Navigation

Instructions for Use

Preparing the appliance

Installing the air expulsion tuben
Fit the air expulsion tube onto the fixture
with the "push" tab and thread it anti-
clockwise, Fig. 6.
Fig. 6
Housing for the air
expulsion assembly
If easier, the housing can also be
removed from the appliance by
pressing the "P u s h" tab and sliding it
out, Fig. 7.
Fig. 7
Once out, thread the expulsion tube as
shown on Fig. 8, making sure that it is
properly secured.
Fig. 8
Then fit the assembly onto the appliance
by slotting it into position Fig. 9.
Fig. 9
Securing the diffusion duct onto the
air expulsion tube
Fit the diffusion duct onto the free end of
the tube pushing both parts gently until the
duct clicks into place. Make sure that the
clips are closed. Otherwise, the duct may
fall off. Fig 10.
54