Dehumidification; Air Purification - BALAY 3XM4H Serie Instrucciones De Uso

Aparato móvil deaire acondicionado
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Instructions for Use

Dehumidification

In this operation function, the appliance
reduces the humidity in the atmosphere.
The appliance purifies the air in the room
at the same time in order to create a
pleasant atmosphere.
• Plug the appliance into the mains
electricity supply.
• Fit the hot air expulsion tube outside as
indicated in "Preparing the appliance
before use".
• Lift the air director on the top of the
appliance.
There are two ways of expelling
condensed water: via the removable tank
and in continuous mode.
Dehumidification via the removable
tank:
• Check that the removable tank is fitted
onto the appliance properly and that the
plug is fitted onto the water drainage
pipe to prevent water from leaking onto
the support surface.
• When the water in the removable tank
reaches a certain level, the appliance
beeps twice. The removable tank full
symbol
appears on the screen at
the same time to indicate that the tank
needs to be emptied. The appliance
stops working when this happens. The
symbol also appears and the appliance
beeps when the removable tank is not
properly fitted into its housing.
• In both events, it is necessary to extract
the tank and pour the water carefully
down the nearest drain.
Dehumidification in continuous mode:
• Place a receptacle at the end of the
water drainage pipe to collect the
condensed water or lead the pipe to the
nearest drain.
• Remove the plug from the water
drainage pipe on the back at the bottom
of the unit. The appliance does not stop
working in this mode. It does not beep or
display the symbol
receptacle is full.
when the external
• Select the dehumidification function
(see "Selecting the operation function").
• Select the operation speed, (see
"Selecting the speed").
Warnings
The amount of water dehumidified may vary
depending on ambient conditions (See
" Technical Information").
When the appliance is operating in the
dehumidification function, the
temperature does not appear on the
screen and cannot be selected or
modified.
Warning!
Do not forget to replace the plug onto
the water drainage pipe when you
change function, otherwise the appliance
will shed water when operated.
Remember that ambient temperature
must be 18ºC or higher in order for the
appliance to work.
The appliance expels hot air through
the drainage pipe when operating in
dehumidification function. This is
necessary for the appliance to work
more efficiently in this operation
function. causing a slight rise in room
temperature

Air purification

The air inside the room (ventilation) is
circulated through a purifying system (air
purification) when the appliance is set to
this function.
The appliance comes with a basic filter
(already fitted on the appliance) and a
double active filter to be fitted by the user,
see "Fitting the purifying filter (double
active)", against:
- Smells and smoke.
- Pollen, bacteria and dust.
• Plug the appliance into the mains
electricity supply.
• Fit the hot air expulsion tube (see
"Preparing the appliance before use").
• Lift the air director on the top of the
appliance.
58

Publicidad

Tabla de contenido
loading

Tabla de contenido