Directions For Use - QEP ASTRO 720 Manual De Instrucciones

GENERAL CONDITIONS
* You have just purchased one of our electric sawing or cutting machines for tiles or similar material. This machine has been inspected thoroughly at
every stage of production to ensure your satisfaction.
* Before using the machine, be sure to read this manual carefully and in full.
* Do not use your machine for any work for which it was not designed.
* Keep the Instructions near the machine.
* Instructions for use, and indications of spare parts given in the manuals, are purely for
* In the event of a claim, or when ordering spare parts, please specify : the model, the serial number and the year of manufacture given on the
nameplate.
* If the user fails to comply with instructions or replaces parts by non-standard parts, or if any person other than specified persons work on the machine,
the guarantee will be cancelled and our responsibility will not apply.
* To maintain the highest quality for our products, we reserve the right to make any technical modification with a view to improvement, without prior
notice.
SPECIFICATIONS
Monophased industrial motor 230 V / 50 HZ - S3/40%
Rpm : 2800 - Input power : 720 W
Rated power : 450 W
200 mm diamond blade
Replacement diamond blade : T 560 075 0 DIAM CUT DX 200 mm
Continuous rim (to be used with water only)
Reaming of the blade : 22,2 mm
Cutting height 43 mm
Unlimited cutting length and width
Lubrication with water by blade paddling
Mitering at 45° made easier thanks to a swivelling working table.
Size : l. 420 x w. 385 x ht. 240 mm
Weight : 12,5 kg
Acoustic pressure < 70 dBA – IP44.
For faience, single fired, marble, glass tiles, sandstone, stoneware tiles, bricks, refractory, imperatively.
Technical datas may be modified prior notice.
SAFETY INSTRUCTIONS
Accident prevention
CAUTION
1-This machine must not be converted or modified but used solely in its original configuration. All spare parts must be replaced by original spare parts
exclusively.
2-Before any action, maintenance or movement, disconnect the machine from the electricity supply network.
3-It is mandatory to use this machine on an electricity supply network complying with the corresponding national instructions. The network shall be
protected by an appropriate differential circuit breaker equipped with a suitable ground point.
4-When using extension cables, ensure that they are type-approved and provided with a suitable ground point.
5-Before connecting the equipment to the electrical network, make sure that the cable and connector are in good condition, otherwise have them replaced
by an expert.
6-Make sure that the switch is turned off before connecting the machine to the electrical network.
7-Make sure that all the safety accessories are in place and that the assembly and adjustment accessories (wrenches, screwdrivers, etc.) have been
moved away before start-up.
8-Use personal protection equipment appropriate to the task to be performed.
9-Do not wear loose clothing or accessories, or similar devices, or shoes with slippery soles.
10-a) Place the machine in a well ventilated and illuminated area.
b) Do not place the machine in an area where it might create acoustic or other nuisance.
c) Place the machine on an even clear surface. Have it levelled, and have it secured if necessary.
d) Keep all persons away from the working area and provide for a sufficient safety area all around the machine.
11- Do not use any accessories or tools other than those recommended.
12-Use your machine or tool without force or undue pressure.
13- Do not pull or carry the machine by the cable nor pull on the cable to disconnect the plug from the socket; do not use the machine without the relevant
personal protection equipment.
14-When the machine cannot be moved by hand, use the recommended means.
15- After cleaning, stow the machine in a dry place, out of reach of children.
Definition of symbols (pictograms)
Safety shoes
Read
compulsory
the instruction
manual
with care

DIRECTIONS FOR USE

Safety gloves Blades without
compulsory continuous rims
must not be
used
Installation of
Goggles and
fixed and
noise ear
mobile
covers
protection on
machine
compulsory
8
Danger :
Comply with the
electrical
indicated
hazard
running speeds